General Specifications
| Dimensions (mm) | 1220 x 2440 y 1200 x 2400 | ||||||
| Thickness (mm) | 6.5 | 9 | 12 | 15 | 18 | 21 | 25 |
| Thickness (Inches) | 1/4” | 11/32” | 15/32” | 19/32” | 23/32” | 13/16” | 1” |
| No. of layers | 3 | 3 | 5 | 5 | 6/7 | 7 | 9 |
| Density | 480 - 550 kg / m³ | ||||||
| Sanding grain | 150 grit on front and 120 grit on back | ||||||
| Adhesive | Phenol-formaldehyde that complies with the E1 emission and CARB standard. | ||||||
| Moisture content | 8% to 12% | ||||||
| Structural Certification | PS1-19 by TP & EN 13986 (CE2 +) by HFB | ||||||
| Forestry Certification | FSC® and PEFC™ certified products | ||||||
Storage Instructions
El tableroSelex® Plywood panels should be stored horizontally, on a flat surface, and in a dry and covered place, on three wooden slats.
Installation Recommendations for Construction:
Selex® Plywood must be installed leaving a gap of 3 to 4 mm in the joints between plywood sheets to absorb the dimensional variations of the wood.
Selex® Radiata Pine Plywood Panels follow the highest standards of responsible forest management, thus ensuring that all raw material used comes from FSC® certified forests and other controlled sources.
Specialties Plywood
Selex specialty products deliver added value in plywood solutions, always maintaining the high quality and versatility that our brand is known for. Find out more about treated and thermally modified panels here.
Environmental Product Declaration (EPD)
An EPD is a certified environmental declaration prepared in accordance with the international standard ISO 14025 (Type III Environmental Declarations).
It is environmental information about a product/service based on a life cycle analysis (LCA) and other relevant information, in compliance with the standard.
