Selex® Plywood B/C



Selex® Plywood B/C
Selex® Plywood panels, high visual quality, high strength, and high versatility. It is a product that accepts synthetic and or wooden repairs with knots smaller than 25mm, with an excellent surface finish, which allows its use in various uses such as furniture, interior cladding, DIY projects, and construction.
Main applications
- Furniture and carpentry
- Decorative projects
- Industrial projects
- DIY projects
- Construction
DOWNLOAD DATA SHEET
General Specifications
Dimensions (mm) | 1220 x 2440 | |||||||
Thickness (mm) | 6.5 | 9 | 12 | 15 | 18 | 21 | 25 | 30 |
Thickness (Inches) | 1/4” | 11/32” | 15/32” | 19/32” | 23/32” | 13/16” | 1” | 1.18” |
No. of layers | 3 | 3 | 5 | 5 | 6/7 | 7 | 9 | 11 |
Density | 480 - 550 kg / m³ | |||||||
Sanding grain | 150 grit on front and 120 grit on back | |||||||
Adhesive | Phenol-formaldehyde that complies with the E1 emission and CARB standard. | |||||||
Moisture content | 8% to 12% | |||||||
Structural certification | PS1-19 by TP & EN 13986 (CE2 +) by HFB | |||||||
Forestry certification | FSC® and PEFC™ certified products |
Storage Instructions
Selex® Plywood panels should be stored horizontally, on a flat surface, and in a dry and covered place, on three wooden slats.
Installation Recommendations for Construction:
Selex® Plywood must be installed leaving a gap of 3 to 4 mm in the joints between plywood sheets to absorb the dimensional variations of the wood.
Selex® Radiata Pine Plywood panels follow the highest standards of responsible forest management, thus ensuring that all raw material used comes from FSC® certified forests and other controlled sources.

Specialities Plywood
Selex specialty products deliver added value in plywood solutions, always maintaining the high quality and versatility that our brand is known for. Find out more about treated and thermally modified panels here.
Environmental Product Declaration (EPD)

An EPD is a certified environmental declaration prepared in accordance with the international standard ISO 14025 (Type III Environmental Declarations).
It is environmental information about a product/service based on a life cycle analysis (LCA) and other relevant information, in compliance with the standard.