SELEX® PLYWOOD B/D Structural AUS



SELEX® PLYWOOD B/D Structural AUS
Selex®Radiata Pine Plywood is structurally tested and AS/NZS229-standard approved, with a high-quality appearance, great resistance, and broad versatility. It’s a product that allows synthetic and/or wood reparations, with knots no larger than 25mm and an excellent surface finish, which allows it to be put to a range of uses, such as construction, woodworking, interior cladding, and DIY projects.
Main applications
- Furniture and carpentry
- Interior veneers
- Decorative projects
- Industrial projects
- DIY projects
- Construction
DOWNLOAD DATA SHEET
General Specifications
Dimensions (mm) | 1200 x 2400 | ||||||
Thickness (mm) | 6.5 | 9 | 12 | 15 | 18 | 21 | 25 |
Degrees F´s (Structural) | F8 | F11 | F8 | F11 | F11 | F8 | F8 |
No. of layers | 3 | 3 | 5 | 5 | 6/7 | 7 | 9 |
Density | 480 - 550 kg / m³ | ||||||
Sanding grain | 150 grit on front and 120 grit on back | ||||||
Adhesive | Phenol-formaldehyde that complies with Super E0 emission standard | ||||||
Moisture content | 8% to 12% | ||||||
Structural certification | AS/NZS 2269 | ||||||
Forestry certification | FSC® and PEFC™ certified products |
Storage Instructions
Selex® Plywood panels should be stored horizontally, on a flat surface, and in a dry and covered place, on three wooden slats.
Installation Recommendations for Construction:
Selex® Plywood must be installed leaving a gap of 3 to 4 mm in the joints between plywood sheets to absorb the dimensional variations of the wood.
Selex® Radiata Pine Plywood panels follow the highest standards of responsible forest management, thus ensuring that all raw material used comes from FSC® certified forests and other controlled sources.

Specialities Plywood
Selex specialty products deliver added value in plywood solutions, always maintaining the high quality and versatility that our brand is known for. Find out more about treated and thermally modified panels here.
Environmental Product Declaration (EPD)

An EPD is a certified environmental declaration prepared in accordance with the international standard ISO 14025 (Type III Environmental Declarations).
It is environmental information about a product/service based on a life cycle analysis (LCA) and other relevant information, in compliance with the standard.