Selex® Plywood B/B Deco

Selex® Plywood B/B Deco

Selex® Radiata Pine Plywood Panels is a high visual quality on both sides, assuring a high resistance. This product features aesthetic value and a solid surface on both sides. It can be used for furniture surfaces or as a base for laminates.

Both sides tolerate repairs with water-based putty without patches or synthetic repairs, delivering a smooth surface with an excellent sanded finish. The layers adjacent to the face and back contain a low presence of open defects, with a tolerance of up to 25 mm. Upon request, the adjacent layer to the face can be free of open defects (UL).

Main Applications

  • Furniture and carpentry
  • Lamination base
  • Decorative projects
  • Transportation Industry

DOWNLOAD DATA SHEET

General Specifications

Dimensions (mm) 1220 x 2440 y 1200 x 2400
Thickness (mm) 6.5 9 12 15 18 21 25
Thickness (Inches) 1/4” 11/32” 15/32” 19/32” 23/32” 13/16” 1”
No. of layers 3 3 5 5 6/7 7 9
Density 480 - 550 kg / m³
Sanding grain 150 grit on front and 120 grit on back
Adhesive Phenol-formaldehyde that complies with the E1 emission and CARB standard.
Moisture content 8% to 12%
Structural Certification PS1-19 by TP & EN 13986 (CE2 +) by HFB
Forestry Certification FSC® and PEFC™ certified products

Storage Instructions
El tableroSelex® Plywood panels should be stored horizontally, on a flat surface, and in a dry and covered place, on three wooden slats.

Installation Recommendations for Construction:
Selex® Plywood must be installed leaving a gap of 3 to 4 mm in the joints between plywood sheets to absorb the dimensional variations of the wood.

Selex® Radiata Pine Plywood Panels follow the highest standards of responsible forest management, thus ensuring that all raw material used comes from FSC® certified forests and other controlled sources.

Specialties Plywood

Selex specialty products deliver added value in plywood solutions, always maintaining the high quality and versatility that our brand is known for. Find out more about treated and thermally modified panels here.

Environmental Product Declaration (EPD)

An EPD is a certified environmental declaration prepared in accordance with the international standard ISO 14025 (Type III Environmental Declarations).

It is environmental information about a product/service based on a life cycle analysis (LCA) and other relevant information, in compliance with the standard.