Selex® Plywood C/D
Selex® Plywood C/D
Selex® Radiata Pine Plywood panels Plywood , intended for use in construction, with high dimensional stability.
Its excellent mechanical and physical resistance to bending, shearing, and compression allows it to be used both indoors and outdoors, as part of a bracing system in a building and to provide thermal and acoustic insulation, as part of a construction system. Another differentiating element is the calibration on its faces, which guarantees its thickness tolerance.
Main Applications
- Roofing
- Structural Walls
- Floor support structure
- Perimeter closures
- Packaging
DOWNLOAD DATA SHEET
General Specifications
| Dimensions (mm) | 1220 x 2440 | ||||||
| Thickness (mm) | 6.5 | 9 | 12 | 15 | 18 | 21 | 25 |
| Thickness (Inches) | 1/4” | 11/32” | 15/32” | 19/32” | 23/32” | 13/16” | 1” |
| No. of layers | 3 | 3 | 5 | 5 | 6/7 | 7 | 9 |
| Density | 480 - 550 kg / m³ | ||||||
| Sanding grain | 150 grit on front and 120 grit on back | ||||||
| Adhesive | Phenol-formaldehyde that complies with E1 emission standard | ||||||
| Moisture content | 8% a 12% | ||||||
| Forestry certification | FSC® and PEFC™ certified products. | ||||||
Storage Instructions
Selex® Plywood panels should be stored horizontally, on a flat surface, and in a dry and covered place, on three wooden slats.
Installation Recommendations for Construction:
Selex® Plywood must be installed leaving a gap of 3 to 4 mm in the joints between plywood sheets to absorb the dimensional variations of the wood.
Selex® Radiata Pine Plywood panels follow the highest standards of responsible forest management, thus ensuring that all raw material used comes from FSC® certified forests and other controlled sources.
Specialities Plywood
Selex specialty products deliver added value in plywood solutions, always maintaining the high quality and versatility that our brand is known for. Find out more about treated and thermally modified panels here.
Environmental Product Declaration (EPD)
An EPD is a certified environmental declaration prepared in accordance with the international standard ISO 14025 (Type III Environmental Declarations).
It is environmental information about a product/service based on a life cycle analysis (LCA) and other relevant information, in compliance with the standard.
